[转帖]关于Celestron, Meade手柄和PC连接的串口线制作
[转帖]关于Celestron, Meade手柄和PC连接的串口线制作http://www.bisque.com/help/theskyV6/Telescope/Telescope_Interface_Cables.htm看来Meade的Autustar和Celestron的Nexstar都采用RJ22的小接口，只是用的引脚不一样。
Device NameWiring SpecificationsAutostar and Autostar II by Meade Instruments Corporation
DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image13.gifRJ22 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image14.gifBBox and Compatibles by Tangent Instruments
DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image15.gifRJ11 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image16.gifGemini by Losmandy
DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image65.gif
RJ11 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image66.gifLX200 by Meade Instruments Corporation
DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image17.gifRJ11 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image18.gifNexStar by Celestron International
NexStar 4
NexStar5
NexStar 8
NexStar 8 GPS
NexStar 11 GPS
NexStar 60
NexStar 80
[*]NexStar 114)DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image19.gifRJ22 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/NexStar_RJ22.gif
Sky Tour by Tele Vue
DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image21.gifRJ22http://www.bisque.com/help/theskyV6/Telescope/image57.gifSky Commander
DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image41.gifOn DB9 Connector jumper pins 1, 4, 6, 8*(*from the Sky Commander User's Manual)RJ11http://www.bisque.com/help/theskyV6/Telescope/image43.gif
Ultima 2000 by Celestron International
DB9 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image15.gifRJ11 Connectorhttp://www.bisque.com/help/theskyV6/Telescope/image16.gif
Standard RS232 Serial Cable Pin Assignments for a DB9 Connector
http://www.bisque.com/help/theskyV6/Telescope/image84.gif
Signal Pin
To Pin
1Data Carrier Detect
2Receive Data (Rx Data)
3Transmit Data (Tx Data)
4Data Terminal Ready
5Signal Ground
6Data Set Ready
7Request to Send
8Clear to Send
9Ring Indicator
Note: On the ActiveSync cables (mobile devices), pins 2 and 3 are swapped so that the mobile device (which is connected to the RS232 serial port) can send/receive data the COM port.
Null Modem Adaptor Wiring Diagram
Pin
Signal Pin
To Pin
CD
1
4
Rx Data
2
3
Tx Data
3
2
DTR
4
1
Ground
5
5
DSR
6
6
RTS
7
8
RI
9
9
--------------------------------------------------------------------------------
Software Bisque Telescope Interface Cable for the Autostar (DB9 Connector)
http://www.bisque.com/help/theskyV6/Telescope/image84.gif
Pin Signal
Pin ------ Pin
CD 1
(not used)
Rx Data
2 -------- 3
Tx Data
3 -------- 2
DTR 4
(not used)
Ground
5 -------- 5
DSR 6
(not used)
RTS 7
(not used)
DTS 8
(not used)
RI 9
(not used)
Software Bisque Telescope Interface Cable (RJ-22 End Connector)
http://www.bisque.com/help/theskyV6/Telescope/image49.gif
1-1
2-2
3-3
4-4
Software Bisque Telescope Interface Cable (RJ-11 End Connector)
http://www.bisque.com/help/theskyV6/Telescope/image50.gif
1-1
2-2
3-3
4-4 能不能中文一下啊
页:
[1]