linkage 发表于 2015-7-13 14:18

【软件分享】The SkyX Pro V10.3.0 安装包

本帖最后由 linkage 于 2018-6-26 18:20 编辑

The SkyX Pro V10.3.0完整安装包 + Build 9334补丁
全面取代10.2.0版本，更新至 10.3.0 Build 9334版本

2018.6更新：

因百度网盘失效，已全部更换链接。

相关内容下载，请看这里：

【软件分享】The SkyX Pro 下载大全(合集)--2018.6更新


注意：
1)以上软件下载仅供个人用于测试连接赤道仪，相机，导星，图像分析等功能使用，请在下载后24小时内自行删除。
2)若以上下载侵犯到您的权益，请及时通知我删除。
3)转载请保留完整信息，谢谢！


从10.2.0 Build 7973至10.3.0 Build 8495的完整更新说明如下：

Build 8495

    Fixed a bug introduced in the prior build where satellites displayed incorrectly.
    Updated Canon camera plug in.
    Update Starlight Xpress plug in.

Build 8489

    Removed a line drawn from center of plotted ellipses.
    A clearer camera auto connect error message - now includes if its the Camera or Autoguider and the actual name of the sub hardware unable to connect.
    Fixed a bug in the prior build where depending on the upgrade path the camera auto connect error might be incorrectly be displayed when no device was selected.The work around for that build is to merely reselect the device representing "No Device Selected".
    Bug Fix - @focus log "Time Taken" was sometimes zero.
    The Bisque TCS “Copy Parameters” report now shows TheSky version, build, current date/ time, and motor and IO firmware versions.
    When clicking on an ImageLinked photo, the "Linked Photo" is prepended with the FITS keyword "OBJECT" name field.This preserves the "OBJECT" keyword when manually slewing to an archived photo providing a much better target name for camera operations.
    Now can 'Find' GSC stars with TYC, GSC, TYCHO - this also fixed a rare bug where @Focus2 would sometimes give "Object not Found" error when auto slew to focus start is on.
    The Accurate Polar Alignment now gracefully prevents incorrectly reusing (iteratively) a given re-calibration data (say after having adjusted polar alignment).


Build 8114

    Added AutomatedImageLinkSettings object.

Build 8073

    Fixed a bug introduced in the prior daily build that gave error "A necessary driver was not found. Error 217" when attempting to connect or choose SBIG AO camera.

Build 8068

    Corrected a bug that caused dragging FOVs with a non-zero position angle toincorrectly command rotators.
    Dome Add On - New "Slit status" - "Unknown", "Last Open command successful","Last Close command successful"
    Corrected a bug that would cause FOVs to appear incorrectly rotated on the star chart in Orthographic projection (especially near the poles).
    Fix a bug where a fresh install may not find the all sky database.
    Fixed a bug where creating a New Profile for an imaging system wouldn't cause the user interface to reflect all the changes in hardware selections and their corresponding properties (except on exit and restart as a work around).Only New Profile was incorrect, Open Profile and Save Profile As worked as expected.
    Improved the confirmation dialog when commanding a rotator via the FOV on the star chart.It should now be much harder to accidentally modify the FOV.
    Corrected a bug where CCW-oriented rotators would incorrectly load their configuration preferences on TSX startup
    Added the ClosedLoopSlew scripting object (Camera Add On required) so that external programs can perform a closed loop slew.




xwyg 发表于 2015-7-13 14:28

收藏，晚上下

nwwolf 发表于 2015-7-13 14:47

板凳顶上

guanzejun 发表于 2015-7-13 15:13

顶，下载看看

vary 发表于 2015-7-13 15:15

感谢楼主分享。

topsxc 发表于 2015-7-13 15:18

谢大师

呆萌de校长 发表于 2015-7-13 15:21

多谢大师

茶根 发表于 2015-7-13 16:02

看看升级

Astronomy风 发表于 2015-7-13 16:06

好东西

DLListing 发表于 2015-7-13 16:12

好东西啊

金龙鱼 发表于 2015-7-13 16:16

感谢分享。

daniel21st 发表于 2015-7-13 16:18

顶一个

lydlzj 发表于 2015-7-13 16:32

多谢分享资源

morning 发表于 2015-7-13 17:18

顶

KK1216412610 发表于 2015-7-13 17:21

感谢分享！

daniel21st 发表于 2015-7-13 17:22

没有序列号啊？

LEEFF 发表于 2015-7-13 17:36

大好人啊

gustasen 发表于 2015-7-13 17:45

非常感谢大师好人。

嘎嘣脆丿 发表于 2015-7-13 17:55

好奇来看看

弥漫星云XP 发表于 2015-7-13 19:54

这个一定要顶一下！
页: [1] 2 3 4 5
查看完整版本: 【软件分享】The SkyX Pro V10.3.0 安装包