gbamboo 发表于 2017-3-24 15:49

AutoStakkert 3.0 发布


Emil 大师的新作, 64-bit beta版

免费下载试用

http://www.astrokraai.nl/software/latest.php

下面的是他做的简介

This is a 64-bit version of AutoStakkert!, and it can pretty much make use of all the memory you have in your system (so it actually makes sense to go for 32GB+ if you can, I find that the 16GB in my current system is often holding me back on processing. Still though, I think I might want to tweak the memory usage of AutoStakkert!3. If you have processing problems and you run out of memory, try disabling buffering (and let me know so I can try to have a look sometime).
Some major changes include:- removal of edge quality - addition of laplacian quality estimator (as a variation on gradient quality); typically requires a bit higher noise robust value; 6 is not uncommon- generally better suited for large recordings with better speed when using usage of many APs (many thousands) and larger images (16MP+)- added double stack option (automatically stack twice, and use previous stack as new reference frame slightly improving quality)- added multi-scale alignment point placement (be a bit careful when you use this, but generally speaking it makes sure that for areas where the APs were a bit too small - e..g, for lunar areas without much contrast causing blurry areas in the stack - this is now compensated by using data from the larger APs)- for each stack a 'session' file is created; this is essentially just a text file containing all settings used to create this particular stack. You can open this session file in AS!3 and recreate the stack - with maybe some minor changes in AP placement- and continue or improve your processing.
.. and lots of stuff in the release notes if you want to have a read...
My suggestion is just to play with it. ( and try to break it, and then wait until after the nice weekend telling me about problems, because the weather is going to be nice and I'd rather be outside than behind a computer https://www.cloudynights.com//public/style_emoticons/default/wink.gif )

大麦芽 发表于 2017-3-24 17:22

danielunsw 发表于 2017-3-24 20:04

8g内存的飘过

c360 发表于 2017-3-24 20:11

AS!2就是好软件,赞AS!3!

ivan11223 发表于 2017-3-24 22:52

终于出来了,!

lrf1981 发表于 2017-3-24 22:57

与时俱进

省略阳光 发表于 2017-3-24 23:02

不知道好不好用

天文爱好者小白 发表于 2017-3-25 22:36

有汉语译文吗?

morning 发表于 2017-3-26 22:03

谁下下来了,传个国内连接的

liu901219 发表于 2017-3-27 10:28

本帖最后由 liu901219 于 2017-3-27 11:42 编辑

点开提示错误


我试了一下还是可以用
但是关闭的时候又出现错误,还关不掉


不是文件路径的问题,我试了。第一次解压打开关闭是OK的,第二次开始出现问题、
我看了一下,第一次打开关闭以后,文件夹出现一个LastSession.as3的文件,然后就出现错误了

求解。。。。。

gbamboo 发表于 2017-3-28 04:08

liu901219 发表于 2017-3-27 10:28
点开提示错误




我能用, 路径有中文? 然后第一次关闭后程序还在后台?

liu901219 发表于 2017-3-28 23:49

gbamboo 发表于 2017-3-28 04:08
我能用, 路径有中文? 然后第一次关闭后程序还在后台?

和中文没关系,我试过了。

解压后第一次打开没任何问题,第二次开始出现错误提示。

关闭软件关不掉,点右上角后提示那个错误,点确定软件还开着,只能任务管理器强关。

myisgod 发表于 2017-3-30 00:12

liu901219 发表于 2017-3-28 23:49
和中文没关系,我试过了。

解压后第一次打开没任何问题,第二次开始出现错误提示。


我也用了,的确出现这些问题,Win10 64位系统,打开提示错误,可以正常使用,但是关闭软件就死了,只有强行结束程序。

ericli28 发表于 2017-4-12 00:05

大师又有好介绍。我用win7 64 bit很正常,没错误。以前要分析视频质量先,现在可以直接叠加,不用分析。
页: [1]
查看完整版本: AutoStakkert 3.0 发布