哪里有840K的驱动程序呀？vista用的
原配的光盘变形不能用了。哪里可以找到呀？ There are no Vista drivers for this product and there never will be Vista drivers for this product due to it's age.http://www.p4c.philips.com/cgi-bin/dcbint/faqview?scy=US&list=aa12_list_partial.html&view=aa12_view_full.html&desc=ToUcam%20Pro%20-%20USB%20PC%20VIDEO%20CAMERA&session=20070806110507_137.117.13.53&slg=ENG&refnr=0064475&refdisplay=WEBCAM_QAC_64475&dct=QAC&ctn=PCVC740K
[ 本帖最后由 littlePig 于 2007-8-6 23:11 编辑 ] http://www.home.zonnet.nl/m.m.j.meijer/D_I_Y/spc900nc.htm
没看完，不妨试试
6. Convert a ToUcam Pro to a SPC900NC...
...with the use of the SPC900NC firmware, though.
As the SPC900NC and ToUcam Pro 740/750/840 are the same internally, I figured that the SPC900NC firmware could be loaded into one of its predecessors. I tried it myself and it works. The camera formerly known as a 740/750/840 is now recognized as an SPC900NC.
On Etienne Bonduelle's website http://www.astrosurf.com/astrobond/ebrawe.htm you can read more about loading firmware, and the use of the required software WcRmac from Martin Burri. As this modification can be destructive to your camera, use it at your own risk and only if you understand the explanations on the above mentioned website.
If you want to try, the SPC900NC binary file can be downloaded here SPC900NC.bin (right click and save as, into the \8116 directory in the folder where you have WcRmac installed). Again downloading and loading this file into your camera is completely at your own risk. Do not blame me, Etienne Bonduelle, Martin Burri or anyone else but yourself when something goes wrong.
Of course, you now need the SPC900NC driver to operate your 'new' camera, because it has no native driver support by any version of Windows.
The Dutch language driver for the SPC900NC can be downloaded here, English language driver here. Or search on the Philips website in your own language.
When completed, you should have a fully 'SPC900NC' compatible camera on the 740/750/840 basis. 大哥们，主要还有控制程序阿。。。 上MSN传个给你 在这里有下载：
http://www.p4c.philips.com/files/p/pcvc840k_00/ 顺便Google 了一下，貌似840K 比较容易改firmware 变成 SPC900NC， 据说用新的YUY2 编码图像质量更好。
http://www.cloudynights.com/ubbthreads/showflat.php/Cat/0/Number/890586/page/0/view/collapsed/sb/7/o/all/fpart/1
First you need to download a couple of things:
WcRmac
SPC900NC.bin
SPC900NC driver (this is the English one)
Note: SAVE your data under the Binaries sceen (Click the "Get current and save as" button) before you go any further!
Install WcRmac and copy the SPC900NC binary file into "C:\Program Files\TWIRG\WcRmac\binary\8112" (or whatever drive you installed it on)
Connect your webcam and launch the capture program of your choice (K3CCDTools, QCFocus...whatever)
Start WcRmac and connect your cam (WebCam/DS Interface). Check the "ok, I take full..." box and then enter the Binaries screen. Select the SPC900NC.bin file and then hit the "Load into cam" button. That should do it. The 840 should now be recognized as the SPC900NC.
Now install the SPC900NC driver and restart. There are no Vista drivers for this product and there never will be Vista drivers for this product due to it's age.
对于这个产品没有VISTA的驱动，对这个产品以及以后将不会有VISTA的驱动
页:
[1]