<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>牧夫天文网 - 自制DIY器材</title>
    <link>https://bbs.imufu.cn/forum-136-1.html</link>
    <description>Latest 20 threads of 自制DIY器材</description>
    <copyright>Copyright(C) 牧夫天文网</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 19 May 2026 12:21:26 +0000</lastBuildDate>
    <ttl>180</ttl>
    <image>
      <url>https://bbs.imufu.cn/static/image/common/logo_88_31.gif</url>
      <title>牧夫天文网</title>
      <link>https://bbs.imufu.cn/</link>
    </image>
    <item>
      <title>各位大佬，我想做一个谐波赤道仪，能不能分享一个纬度调节座的数据模型！</title>
      <link>https://bbs.imufu.cn/thread-823980-1-1.html</link>
      <description><![CDATA[感谢各位大佬分享一下]]></description>
      <category>自制DIY器材</category>
      <author>Xulifeng</author>
      <pubDate>Sun, 03 May 2026 08:21:12 +0000</pubDate>
    </item>
    <item>
      <title>自制25谐波经纬仪，20谐波赤道仪</title>
      <link>https://bbs.imufu.cn/thread-823962-1-1.html</link>
      <description><![CDATA[25型20型用的是同一款壳体，经纬仪比赤道仪多了一套龙门框、少了一个纬度座。两款配同样的底座接口，经纬仪与赤道仪无缝切换。

25谐波经纬仪：
哈默纳科25-160谐波减速器，速比160。
同步减速1:3。总速比480。
减速器轴与电机轴平行装置。
同步带涨紧装置。绷得紧紧的 ...]]></description>
      <category>自制DIY器材</category>
      <author>叶工好玩</author>
      <pubDate>Thu, 23 Apr 2026 00:16:47 +0000</pubDate>
    </item>
    <item>
      <title>新鲜出炉的乞丐版迷你远程台</title>
      <link>https://bbs.imufu.cn/thread-823945-1-1.html</link>
      <description><![CDATA[诚邀第二批吃螃蟹的同好。限5位，已有一两位表示想要。只要不断电不断网，是我台子的本身问题能愉快协商，直到你能稳定使用1个月。我倒贴找外援都行。

常不在牧夫，直接来小黄鱼私聊。
 ...]]></description>
      <category>自制DIY器材</category>
      <author>山顶确实美</author>
      <pubDate>Mon, 13 Apr 2026 08:07:42 +0000</pubDate>
    </item>
    <item>
      <title>自制DIY牛反</title>
      <link>https://bbs.imufu.cn/thread-823934-1-1.html</link>
      <description><![CDATA[自己喜欢摄影，水平仅仅算入门，早期给尼康D7000配了个几百块的70-300的镜头拍过月亮，虽然图像画质惨不忍睹，但也算是见识了长焦的魅力。现在经济条件稍好点了，单反也玩全画幅微单了，大三元里的70-200MM F2.8也玩过了，可长焦情节一直有，前段时间弄了个500MM ...]]></description>
      <category>自制DIY器材</category>
      <author>zyx114</author>
      <pubDate>Tue, 07 Apr 2026 10:59:18 +0000</pubDate>
    </item>
    <item>
      <title>DIY 20吋 F3.7 onstep goto 拍攝,馬蹄牛</title>
      <link>https://bbs.imufu.cn/thread-823929-1-1.html</link>
      <description><![CDATA[總重100磅以下,可分拆四部份,一人休旅車搬運,一人架起,一人操作]]></description>
      <category>自制DIY器材</category>
      <author>starman628</author>
      <pubDate>Mon, 06 Apr 2026 02:55:07 +0000</pubDate>
    </item>
    <item>
      <title>共享80mm/500口径折射镜镜筒3D打印文件！</title>
      <link>https://bbs.imufu.cn/thread-823911-1-1.html</link>
      <description><![CDATA[共享80mm/500口径折射镜镜筒3D打印文件！打印图纸拓竹官网模型库链接：https://makerworld.com.cn/zh/models/462214-80mmkou-jing-tian-wen-wang-yuan-jing-jiao-ju-500mm#profileId-381728]]></description>
      <category>自制DIY器材</category>
      <author>cxkx001</author>
      <pubDate>Sat, 28 Mar 2026 14:39:11 +0000</pubDate>
    </item>
    <item>
      <title>咨询</title>
      <link>https://bbs.imufu.cn/thread-823855-1-1.html</link>
      <description><![CDATA[各位大佬好，我想DIY一个203/800的牛反镜，镜筒用PVC，副镜短轴60mm，其他的定位工件自己画图设计用NC加工，目前遇到一个问题，在设计基本位置时候不太清楚实焦反射后到物镜中心（或光轴）的一般高度是多少，即图中h2高度。或者实焦高出镜筒外壁多少也行，即图中h1高度 ...]]></description>
      <category>自制DIY器材</category>
      <author>苏州第一深情</author>
      <pubDate>Wed, 11 Mar 2026 03:19:29 +0000</pubDate>
    </item>
    <item>
      <title>DIY牛反</title>
      <link>https://bbs.imufu.cn/thread-823851-1-1.html</link>
      <description><![CDATA[我实在是受不了牛反的结构了，想搞一台只需要动副镜不动主镜的牛反，但是主镜底座这一块实在是弄不明白，问AI试了好多方案都没有自己想要的，各位大佬出出招，把镜片放在那里让它不移动不形变就这么难吗？
 ...]]></description>
      <category>自制DIY器材</category>
      <author>直针</author>
      <pubDate>Sun, 08 Mar 2026 12:54:19 +0000</pubDate>
    </item>
    <item>
      <title>牛反粗磨无法吻合</title>
      <link>https://bbs.imufu.cn/thread-823782-1-1.html</link>
      <description><![CDATA[大家好！是这样的，近期我正在制作反射望远镜，在60目粗磨阶段，使用1/3正心主镜在上工具板在下修吻合，经过了三天共六小时的时间，进行气泡法检验时，推动主镜时仍然有阻滞感，且中心有气泡（图1），故求教各位大佬们，出言献策，感激不尽！！！
 ...]]></description>
      <category>自制DIY器材</category>
      <author>ztP</author>
      <pubDate>Mon, 02 Feb 2026 12:45:03 +0000</pubDate>
    </item>
    <item>
      <title>关于平台赤道仪的一些问题</title>
      <link>https://bbs.imufu.cn/thread-823780-1-1.html</link>
      <description><![CDATA[平台赤道仪精度怎么样？对好极轴的话能跟多久？]]></description>
      <category>自制DIY器材</category>
      <author>看看看星空</author>
      <pubDate>Thu, 29 Jan 2026 13:52:43 +0000</pubDate>
    </item>
    <item>
      <title>咨询</title>
      <link>https://bbs.imufu.cn/thread-823740-1-1.html</link>
      <description><![CDATA[老师们好，遇到个奇怪问题 ，振旺盒子连接azgti每次极轴校准后，go to目标错误，必须要打开azgti的手机apP进行校准零位才能正常使用，这是不是赤道仪坏了，谢谢]]></description>
      <category>自制DIY器材</category>
      <author>晓冰</author>
      <pubDate>Sun, 18 Jan 2026 11:57:17 +0000</pubDate>
    </item>
    <item>
      <title>114 450刨面 牛反</title>
      <link>https://bbs.imufu.cn/thread-823656-1-1.html</link>
      <description><![CDATA[谁用过114 450刨面镜啊  这个拍深空怎办样，觉得比较便携，这个镜子能入门用吗]]></description>
      <category>自制DIY器材</category>
      <author>KD413</author>
      <pubDate>Tue, 30 Dec 2025 08:25:44 +0000</pubDate>
    </item>
    <item>
      <title>本人打算无偿转让一套磨镜子的设备和一块已精磨完了的玻璃</title>
      <link>https://bbs.imufu.cn/thread-823627-1-1.html</link>
      <description><![CDATA[有沈阳的朋友吗？本人打算无偿转让一套磨镜子的设备，还有一块已经精磨完了的玻璃。本人没有精力继续做下去了。
玻璃的规格是:直径400毫米 厚度40毫米 焦距1600毫米，材质是K9。
我的电话13042441943 ...]]></description>
      <category>自制DIY器材</category>
      <author>成铁纪</author>
      <pubDate>Tue, 23 Dec 2025 08:42:23 +0000</pubDate>
    </item>
    <item>
      <title>我手上有个牛反的主镜想要镀铝</title>
      <link>https://bbs.imufu.cn/thread-823626-1-1.html</link>
      <description><![CDATA[我手上有个牛反，D150的吧，上面的原来的镀层有一些斑了，我用水洗的时候，镀层掉落了，而且看原来的镀层也薄了，都可以看到后面了，想重新镀铝，不知道各位大拿能告诉我哪里有提供镀铝的吗？自己镀只能镀银了，但镀银寿命短啊
 ...]]></description>
      <category>自制DIY器材</category>
      <author>sunstar126</author>
      <pubDate>Tue, 23 Dec 2025 02:10:41 +0000</pubDate>
    </item>
    <item>
      <title>自制双速调焦</title>
      <link>https://bbs.imufu.cn/thread-823613-1-1.html</link>
      <description><![CDATA[物料清单

１、３Ｘ６Ｘ２.５轴承１个
２、３Ｘ８Ｘ４轴承１个
３、１２Ｘ21Ｘ5轴承１个
４、１２Ｘ２１Ｘ５止推轴承１个
５、Ｚ１－２４－２８Ｘ６.３涨紧圈外圈１个
６、３Ｘ４５圆柱销１个
７、１２mm钢珠２个
８、1 ...]]></description>
      <category>自制DIY器材</category>
      <author>zug110</author>
<enclosure url="https://bbs.imufu.cn/data/attachment/forum/202512/19/105352mebcfr5cefer7020.jpg" length="3807525" type="image/jpeg" />      <pubDate>Fri, 19 Dec 2025 03:00:06 +0000</pubDate>
    </item>
    <item>
      <title>星野赤道仪重锤电源</title>
      <link>https://bbs.imufu.cn/thread-822634-1-1.html</link>
      <description><![CDATA[可以USB输出也可以DC口输出做为相机假电池电源]]></description>
      <category>自制DIY器材</category>
      <author>唐长老</author>
      <pubDate>Thu, 16 Oct 2025 22:54:05 +0000</pubDate>
    </item>
    <item>
      <title>DIY双筒望远镜瞳距问题-屋脊棱镜原理求解</title>
      <link>https://bbs.imufu.cn/thread-822595-1-1.html</link>
      <description><![CDATA[某鱼上淘了一个二手星特朗80DX，用了近一年，能看土星环和木星大红斑，但是只能看一点点。

最大的问题每次都只能看半小时到一小时，因为只用一只眼睛看太累了，所以又萌生了用双筒观星的想法，去了查下星特朗天神系列，想一步到位大口径的，奈何太贵，小口径的又感觉看 ...]]></description>
      <category>自制DIY器材</category>
      <author>微微小雨</author>
      <pubDate>Tue, 23 Sep 2025 15:53:48 +0000</pubDate>
    </item>
    <item>
      <title>星特朗手柄求救</title>
      <link>https://bbs.imufu.cn/thread-822587-1-1.html</link>
      <description><![CDATA[有大佬知道右下角这个丝印ACD的元器件的具体型号吗，我手柄上这个爆了]]></description>
      <category>自制DIY器材</category>
      <author>nbfans</author>
      <pubDate>Sat, 20 Sep 2025 06:00:41 +0000</pubDate>
    </item>
    <item>
      <title>如何磨制凸透镜？《天文爱好者的望远镜》里没写</title>
      <link>https://bbs.imufu.cn/thread-822585-1-1.html</link>
      <description><![CDATA[我记得大概十多年前在一个书店看到一本《如何自制天文望远镜》，后来一直找不到这本书。来到论坛后找到一本电子档的《天文爱好者的望远镜》内容和配图可以说是一模一样，但是我记得《如何……》此书里还包括了透镜的研磨方式，而《天文爱好者……》这本里面只包含了凹面 ...]]></description>
      <category>自制DIY器材</category>
      <author>一碗洲</author>
      <pubDate>Fri, 19 Sep 2025 07:01:40 +0000</pubDate>
    </item>
    <item>
      <title>DIY远望镜中遇到的问题</title>
      <link>https://bbs.imufu.cn/thread-822555-1-1.html</link>
      <description><![CDATA[各位大神、老铁们，在DIY了一个D106F1000分离式物镜望远镜，镜筒后端直接用尼康单反相机卡口，晚上用X3增倍镜拍出来的月亮全是澡点，请大家帮忙看看哪里出错了，要怎么改正，谢谢。]]></description>
      <category>自制DIY器材</category>
      <author>嘉宇</author>
      <pubDate>Mon, 01 Sep 2025 08:16:23 +0000</pubDate>
    </item>
  </channel>
</rss>