【转】Nocturne天文台建造

http://www.allred-astro.com

就是拍过M65 超新星的那位，

                               
登录/注册后可看大图

Supernova Astrograph (12.5" Zambuto - My Design) riding on a Paramount ME
FLI Microline ML8300M with CFW-2-7 Filter Wheel
Astrodon L:R:G:B Gen II & Ha:OIII:SII Filters
Starfish Autoguider

建造前：

地基、支柱、地板：

主体、墙体：

推拉屋顶：

设计图：参考  http://www.doghouseastronomy.com/

电气：

完成，准备开光：

继续上图啊!

这么大的屋子，如何防潮

开光照：

MARK一下，真是不错的参考样板。

顶steven

现役和较早前的器材设备：


The scope is based around a Carl Zambuto 12.5" primary mirror and an Antares 4" secondary. The tube is a 390mm I.D. carbon fiber sandwich design from Klaus Helmerichs in Germany. The mirror cell, spider, and Toadloader focuser were custom machined by Paul Van Slyke (Van Slyke Engineering): they are bombproof. He machined the focuser tube to perfectly fit the 3" ASA Wynne Corrector that is used to flatten the field. I just received an off-axis guider from Austria (not shown in this photo)
It still needs to be painted flat black or flocked inside and to have the tube ends epoxy coated. The Van Slyke parts are incredible! That stainless steel shaft on the spider is 1" diameter. The Toadloader 3" focuser is also unbelievably robust and incredibly precise..

old setup... - Astro-Physics AP130 F/6 Starfire - Losmandy G-11/Gemini - FLI ML8300M camera with CFW-2-7 filter wheel - Borg 45ED refractor with Fishcamp Starfish autoguider

哈哈，大揭盖式！

君临天下 发表于 2013-3-29 15:17

                               
登录/注册后可看大图

继续上图啊!

就这些{:soso_e100:}

只能说一句：洋鬼子真会玩儿！{:soso_e137:}

好羡慕啊，老外们有这么个好地方！

推拉的屋顶，设计很简单的哈，可以效仿弄个，呵呵。

羡慕