本帖最后由 linkage 于 2015-1-14 13:32 编辑
The SkyX Pro V10.2.0 Build 7973补丁包(2014版本)
之前分享的The SkyX Pro，有同好反应ALLSkyDatabase使用有问题。
仔细检查后，发现ALLSkyDatabase要求7927以上版本，但是分享的只有7398版本。
因为系统重做，部分文件丢失，最近又想办法找到了。
特分享如下：
各位蛋疼的小伙伴们，赶快来下载更新
下载链接：猛戳这里
合集下载，安装说明等等，请看这里：
http://www.astronomy.com.cn/bbs/thread-304413-1-1.html
从Build 7398至 Build 7927的修改内容，请看如下：
Build 7973
New feature - Added Imaging System Profiles to allow maintaining more than one set of hardware configurations.
Camera Add On
Don't allow trailing spaces on autosave folder name.
New option "Remove whitespace from AutoSave filenames" under Camera AutoSave Setup, Advanced.
Fixed a bug introduced in prior build 7789 where the filter wheel was incorrectly commanded to move with every exposure rather than only when the filter did indeed change.
Scripting - Added centerAO() method to TheSkyX.ccdsoftCamera object. Note: clients using the CCDSoft2XApapter object can call this method by setting the property 'Camera.PropLng("centerAO()") = 1' as a workaround to avoid changing that interface (especially for those using early binding).
Corrected a bug that would crash Temma mounts when pulseguiding, or moving via the virtual hand-paddle.
Added toggle for extend labeling comets with magnitude.
All Sky Image link now always restores source extraction parameters.
Fixed a bug introduced into a prior daily build that caused All Sky Image to crash on some photos.
FITS file extensions are now consistent throughout when opening FITS files.
Build 7927
Fixed typo on new configure WiSky window.
Build 7919
TPoint Add On
Added alternate polar alignment adjustment options.
Added a graph of the path taken during the pointing run.
Camera Add On
Fixed a bug that would sometimes cause single exposures to fail to move the filter wheel.
Added the scripting object SelectedHardware.
Improved overall performance and speed of All Sky Image Link.
Bisque TCS Window now has a means to configure the MKS-5000 WiSky.
Build 7773
Fixed a bug where object names were truncated when searching MPCORB.DAT.
Fixed a bug where it wasn't possible to abort an all sky image link from the automated pointing run window (aborting from the image link window was the work around).
Fixed a possible crash when attempting to PulseGuide with some native mount drivers.
Improved support for all Ascom devices.
This update allows TheSkyX to more gracefully handle drivers that don't quite conform to Ascom.
Distribute native apogee filter wheel support (Apogee OEM driver required).
Corrected a bug that would cause temperature compensation to sometimes occur even if disabled in the GUI.
Fixed a bug introduced in the prior daily build that broke a Photo's right click "To Image Link" "Center Cursor..." and "Set Chart Time to Photo Time" calls to incorrectly report "file/folder does not exist".
Build 7715
Camera Add On
Bug Fix - Introduced in the prior build 7708, calling szBinModeFromIndex(0) threw an exception Parameter not optional.
Some rotators move clockwise as their angle values increase, some move counterclockwise. Previously, the direction of rotation was stored as a property of each FOV defined in the system. Now that property has been moved into the configuration of the rotator itself. This should make rotators easier to configure and use, and also makes it possible to fully utilize the properties of the rotator throughout the rest of TheSkyX.
TheSkyX now is able to autoguide after rotating a connected rotator. The rotator must be connected during autoguider calibration and subsequent autoguidng. Prior builds required re-calibrating the autouguider after the rotate.
The user can manually control declination when autoguiding when not connected to a mount.
Getting/setting m_ptGuideStarHiRes,m_TrackBoxHiRes, m_TrackBoxHiResAO, and all autoguide calibration parameters by scripting Camera.PropLng is no longer case sensitive.
Relay-guiding with MaxIm's camera now rounds UP to the nearest second
Corrected the durations when relay-guiding with Ascom cameras should now be correct (previous relay activations were much shorter than they should have been).
Automated pointing run sextractor defaults are now 5,10 (were 10,10) detection threshold, and minium number of pixels above threshold, respectively.
Bug Fix - On Windows, sometimes File Open File/File Save windows did not refresh properly. The workaround in the past was to lower the target frame rate, which is no longer necessary.
Fixed a bug where Image Link was incorrectly ignoring the rotator's angle when it was automatically adjusting FOV angles to match its solved angle.
Corrected spelling error in FITS header comment.
Fixed a bug where the date time format was incorrectly being set to the Image Link path by going to Tools, Open Fits.
Completion of a Paramount Find home takes ProTrack in stride (a benign issue).
Fix potential crash when a FOVI with an OAG element is turned on and the field of view is small.
Fixed a display error when showing the location reported by the NexStar hand paddle.
Fixed a possible crash caused by attempting to correlation-guide without a target.
Fix a bug introduced in prior build's new feature - Image Link's automated pointing run editing always works now.
Focuser temperature compensation can now make use of temperature values read from either the device itself, the partnered device, or a Paramount mount.
Corrected a bug that was causing Ascom mounts to move incorrectly in response to TheSkyX's virtual hand paddle.
Exposure times in Take Series now allow 3 decimals of precision.
Tool, Telescope Setup, fixed accelerator buddies for two controls were not "set" (so an ampersand appeared on the control's text).
Added option for TheSkyX's tcpserver to automatically close the socket connection upon responding.
Build 7477
Camera Add On now supports the AO on the SBIG STT/STX/STXL.
All windows with splitter child windows will now be more obvious..
Avoid potential @Focus2 crash.
Added "Closed Loop Slew" button to star chart's right click menu, Observing List window, Telescope window and Telescope Toolbar nearly every place a Slew button is available.
Added commonly used buttons to telescope toolbar.
TheSkyX focuser drivers that support logging will now allow their logs to be displayed in the GUI.
Ascom focusers, domes, rotators now implement logging.
Manually moving the focuser now automatically toggles temperature compensation off (without clearing the KVP).
Added a button "Automated ImageLink Settings" on the ImageLink Setup tab that controls settings using during automated image links (like when doing a TPoint automated pointing run or a Closed Loop Slew). Prior to this, these settings where only available through the optional TPoint Add On.
Bug fix - changes to DSS setup parameters apply w/o having to close and re-open DSS window.
Camera Add on - Image and Video "Take Series" has a new the option to execute the "Repeat" per series or across series.
The frame-grabbing video camera no longer requires that the video preview window be present in order to function.
Orion filter wheel driver is now distributed.
|
|
置顶卡
变色卡
千斤顶
显身卡
回复