[quote:e14b07c2d3="愚公"]如果买不到sj33的串口线,可以买条sj33的usb数据线,拆了usb线,自己焊接串口线,但可能要加串口的电平转换电路。sj33接口的定义如下:
SONY Clie(T、NR、NX、NZ、TG、SJ、SL Series):
管脚 定义注解
1GNDGround For Signal/Power Supply
2USB_D+ Positive USB data signal
3USB_D- Negative USB data signal
4USB_GND Ground For USB
5VBUS VBUS For USB
6- -
7DC+B External Power Supply Terminal(Not Charge)
8Charge Charge Terminal(DC 5.2V)
9- -
10 UNREG4.2V-3.4V 100mA
11 HOTSYNC HotSync interrupt Terminal
12 DTR UART Signal ,0-3.3V CMOS Level
13 RXDSignal ,0-3.3V CMOS Level
14 TXDSignal ,0-3.3V CMOS Level
15 CTSSignal ,0-3.3V CMOS Level
16 RTSSignal ,0-3.3V CMOS Level
17 CNTPeripheral Detection
18 GNDGround For Signal/Power Supply[/quote]
天书啊,我是看不懂,更做不了。SJ系列的串口线实在是太难找了,在网上问了不少卖配件的,都没有。老兄你能不能帮我做一个?能的话就太谢谢你了。我手里望远镜连线的串口是母的,pda连线应该是公的。另外,有一段话我看不懂,不过可能挺重要:
For the handheld do not just buy a serial Hotsync cable! This might work well with the PC, but not with the telescope. The reason is that many Palm devices have serial ports with digital voltage levels only. They need level converters to bring the signals to proper RS232 levels, and these are usually built into the serial cable. But they need power, and Hotsync cables usually take this power from the PC side (from the RTS signal for example). This makes sense to save the Battery of the handheld. However, when connecting to the telescope we only have three lines. There is no RTS or similar signal where the level converters could take their power. So what you need is a cable that takes the power for the level converter electronics from the PDA side. |