| [url=http://www.ptgreystore.com/category/69-usb-30-cameras.aspx][/url] | | | | MODEL | VERSION | MP | IMAGING SENSOR | | FL3‑U3‑13S2C‑CS | | FL3‑U3‑13S2M‑CS |
| | 1.3 MP | - Sony IMX035 CMOS, 1/3", 3.63 µm
- Rolling Shutter
- 1328x1048 at 120 FPS
| | | 1.3 MP | - On Semi VITA1300 CMOS, 1/2", 4.8 µm
- Global Shutter
- 1280x1024 at 150 FPS
| | FL3‑U3‑13E4C‑C | | FL3‑U3‑13E4M‑C |
| | 1.3 MP | - e2v EV76C560 CMOS, 1/1.8", 5.3 µm
- Global Shutter
- 1280x1024 at 60 FPS
| | FL3‑U3‑32S2C‑CS | | FL3‑U3‑32S2M‑CS |
| | 3.2 MP | - Sony IMX036 CMOS, 1/2.8", 2.5 µm
- Rolling Shutter with Global Reset
- 2080x1552 at 60 FPS
| | | 8.8 MP | - Sony IMX121 CMOS, 1/2.5", 1.55 µm
- Rolling Shutter with Global Reset
- 4096x2160 at 21 FPS
|
| A/D Converter | 12-bit (FL3‑U3‑13S2, FL3‑U3‑32S2, FL3‑U3‑88S2) / 10‑bit ( FL3‑U3‑13Y3, FL3‑U3‑13E4) | | Video Data Output | 8, 12, 16 and 24-bit digital data | | Image Data Formats | Y8, Y16, Mono8, Mono12, Mono16 (all models) RGB8, YUV411, YUV422, YUV444, Raw8, Raw12, Raw16 (color models) | | Partial Image Modes | Pixel binning and region of interest (ROI) modes | | Image Processing | Gamma, lookup table, hue, saturation, and sharpness | | Gain | Automatic*/Manual/One-Push* Gain modes (*Free running only) | | 0 dB to 24 dB (FL3‑U3‑13S2, FL3‑U3‑32S2, FL3‑U3‑88S2) / 0 db to 18 db (FL3‑U3‑13Y3, FL3‑U3‑13E4) | | Gamma | 0.50 to 4.00 | | White Balance | Automatic/Manual modes, programmable via software | | Color Processing | On-camera in YUV or RGB format, or on-PC in Raw format | | Digital Interface | USB 3.0 interface with screw locks for camera control, data, and power | | Transfer Rates | 5 Gbit/s | | GPIO | 8‑pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial I/O: 1 opto‑isolated input, 1 opto‑isolated output, 2 bi‑directional I/O pins | | External Trigger Modes | IIDC Trigger Modes 0, 1 (excluding FL3‑U3‑13E4), 14 (FL3‑U3‑13E4 only), and 15 | | Synchronization | via external trigger or software trigger | | Shutter | Rolling Shutter (FL3‑U3‑13S2) / Global Reset (FL3‑U3‑32S2, FL3‑U3‑88S2) / Global Shutter (FL3‑U3‑13Y3, FL3‑U3‑13E4) | | Automatic*/Manual/One-Push*/Extended Shutter** modes (*Free running only) (**except FL3‑U3‑13Y3) | | 0.008 ms to 1 second (FL3‑U3‑13S2) / 0.006 ms to 1 second (FL3‑U3‑13Y3) / 0.016 ms to 1 second (FL3‑U3‑13E4) / 0.01 ms to 32 seconds (FL3‑U3‑32S2) / 0.021 ms to 1 second (FL3‑U3‑88S2) | | Image Buffer | 32 MB frame buffer | | Memory Channels | 2 memory channels for custom camera settings | | Flash Memory | 1 MB | | Dimensions | 29 x 29 x 30 mm excluding lens holder (metal case) | | Mass | Without optics: 35 g (FL3‑U3‑13S2, FL3‑U3‑32S2) / 41 g (FL3‑U3‑13Y3, FL3‑U3‑13E4, FL3‑U3‑88S2) | | Power Consumption | 5 V, <3 W, via GPIO or USB 3.0 interface | | Camera Specification | IIDC v1.32 | | Camera Control | via FlyCapture SDK, CSRs, or third party software | | Camera Updates | In-field firmware updates | | Lens Mount | CS‑mount (FL3‑U3‑13S2, FL3‑U3‑32S2) / C‑mount (FL3‑U3‑13Y3, FL3‑U3‑13E4, FL3‑U3‑88S2) | | Temperature | Operating: 0° to 45°C; Storage: -30° to 60°C | | Emissions Compliance | CE, FCC, RoHS | | Operating System | Windows 7 32- or 64-bit | | Warranty | Two years |
Development Kit Contents
The Flea3 USB 3.0 camera does not offer a Development Kit
Emissions and RoHS Compliance
CE, FCC, RoHS
|
显身卡
